Minelab GPX 5000
Gold Prospecting & Deep Relic
MPS, DVT & SETA
Bi-Level, Advanced Pulse Induction
11" Round Double-D plus 15 x 12-inch Monoloop.
6.35mm (1/4") headphone/speaker jack.
Koss 100 ohm headphones.
64 x 128 pixels, transflective with white backlight.
Yes with adjustable automatic 'time-out'.
Setting changes saved automatically and remain until changed or reset. Factory Presets can be restored on start-up.
General, Deep, Hi-Mineral, Patch, Hi-Trash & Pinpoint (all user programmable)
Iron Reject: range 1 to 10 & Off (All Metal).
Normal, Sensitive Extra, Enhance, Sharp, Sensitive Smooth, Coin/Relic, Salt/Gold & Fine Gold.
Variable Control 1 to 100.
Quiet, Normal, Deep & Boost.
Automatic Ground Balance, Fixed & Tracking: Slow, Medium & Fast. Quick-Trak button.
Ground Balance Type
General, Specific & Ground Balance Off.
Rx Gain 1 to 20.
Tune / Noise Cancel
Automatic & Manual 0 to 255.
Adjustable turn control.
Target Volume Adjust
Target Volume 1 to 20. Volume Limit 1 to 20.
Lithium-ion rechargeable battery 68Wh with in-built amplifier for speaker use. Approx. 12 Hours use. Supplied with mains and vehicle charger.
Low battery alert
1100mm (43.3”) à 1300mm (51.2”).
2.4kg (5.3lbs) including 11” coil (excluding battery and accessories). Battery weight 780g (1.7lbs).
3 years control box & coil.
MPS (Multi Period Sensing) is Minelab’s advanced Pulse Induction (PI) technology that transmits pulses of different time periods. MPS also samples the receive signal at multiple time periods allowing target signals and ground signals to be separated. This effectively removes the ground signal from even the most highly mineralised ground while still being sensitive to both small and deep gold. This achieves superior depth in extremely mineralised ground.